evelynwww.elementelectronics.com – How to fix the Element TV Remote not working issue
There could be a variety of factors at work when you try to use your remote and discover that it is not working properly. Despite this, there is no cause for alarm because you can usually fix the majority of issues related to your Element TV remote not working on your own.
If the remote control for your Element TV isn’t functioning properly, there may be an issue with the receiver or the remote. To determine which of the two is being impacted, a few steps must be done. Simply read this article to learn the necessary procedures and information about the problem to find the answers and steps that should be followed to fix it.
HOW TO FIX THE ELEMENT TV REMOTE NOT WORKING ISSUE
- If your Element TV remote is not working properly, you should check the batteries in it before using any other procedures. Whenever an issue arises, the first thing you should always do is change the battery in your remote control. Once the batteries are new, check your remote’s functionality. You must verify that your remote is still connected to your receiver if the batteries in your Element remote have been changed. Numerous methods can be employed to resolve this issue. Let’s start:
Solution #1: Restart both the remote and the Element TV.
- Perform a power cycle check as a first resort. To finish it, adhere to these steps:
- Turn off both the television and the Roku reviewer.
- Disconnect any devices that are connected to your TV, including the cords that are attached to the power source, once you have done so. Please make sure that everything is unconnected for the next five minutes.
- Restart your receiver and television after making sure that all of the connections are connected correctly.
- You should verify that your Element TV’s remote is now operating correctly.
Solution #2: Check the connection on your Element TV.
- First, make sure that everything is connected correctly and that no cords are hanging down.
- Second, make sure nothing is blocking your connection’s path and that you are inside the acceptable range.
- If your Element TV remote keeps disconnecting, you ought to reset your Element TV remote.
- Remove the batteries from your Element remote before continuing.
- Your receiver should then be turned off and disconnected after which you should wait 10 seconds before turning it back on.
- Unplug your receiver when the ten seconds have gone, then plug it back in before starting over.
- Note: You should wait until your receiver has completely restarted before changing the batteries in the element remote.
Solution #3: Adjust your Element TV volume
- To adjust the TV volume, first determine whether you can still use a different remote. You can move on to the following step if it can.
- You must first reset your Element remote before you can proceed. Take your Element TV remote’s batteries out next. then remove the box from your receiver.
- Before you may start the process of restarting your receiver, ten seconds must elapse.
- Replace the batteries in your remote control after your receiver has fully restarted and the home screen has become visible. After then, make sure it is still operating properly by checking.
Solution #4: Enter a channel number manually on your Element remote control.
- Verify that you have access to every channel by checking.
- By clicking the Menu button, you can get to the TV Guide Main Menu. You can scroll down through the available selections on your remote control after it appears there.
- Make your choice in the Setup section where it can be found.
- You need to look for the section that is marked “No Auto-Tune” after entering this region.
- Use the arrow on the left side of the keyboard to turn off this feature.
- Leave the menu and try to change the television channel.
Conclusion: So, if your Element TV isn’t working properly, you can try the steps listed above. These are all really easy and simple actions to follow.
